Magnetic Field Induction Loop Dectector For Auto Gate Control System
| Place of Origin: | Guangdong, China (Mainland) |
|
|
| Add to My Favorites | |
| HiSupplier Escrow |
Product Detail
Magnetic Field Induction Loop Dectector For Auto Gate C
Magnetic Field Induction Loop Dectector For Auto Gate Control System
Description:
PD132 should be installed in a convenient weatherproof location as close to the loop as possible. Installation location must choose to stay away from the heat source; it around other devices must maintain a distance of at least 10mm (must not installation close with boxes wall). A correct loop configuration and detector installation will ensure a successful inductive loop detection system. Loop of several important parameters include: loop figure, size, turns, install methods.
Operation and Indication
While the detector is tuning, the green Channel LED and red Power LED will be turn on. It remain about 2 seconds, then the green LED turn off. If a loop fault exists the Channel LED will come on and flash indicating a fault. If the fault is self-healing the detector will continue to operate. The green channel LED will also glow whenever a vehicle is detected passing over the inductive loop. The red Power LED at the top of the unit will remain on to indicate that the unit is powered.
Application:
Gate Opener
Traffic light
Vehicle monitor
Highway toll system
Parking lots toll system
Specifications:
Operating voltage: | 12V DC |
Power Consumption: | <5W |
Output : | Relay Output |
Frequency range: | 20 KHz to 170 KHz (4 grades adjustable) |
Reaction time: | 10ms |
Signal holding time: | Unlimited / limited 10 minutes when loop is permanently covered |
Sensitivity: | 7 grades |
Loop inductance: | Ideal 100μH to 300μH (include connecting wiring) |
| Max 50μH to 1000μH (include connecting wiring) |
Loop Wiring: | Max. 100m, twisted at least 20 times per meter, total resistance <10 Ohm |
Auto correcting time: | 1s to 2s |
Operating temp: | -30 to +70 |
Storage temp: | - 40 to + 85 |
Relative humidity: | ≤ 95% |
Dimensions: | 78×40×108 mm (L×W×H) (include socket ) |
Net Weight: | 340g(include socket) |
Dimensions | 78x40x108 mm |
Related Search
Find more related products in following catalogs on Hisupplier.com
Company Info
Integer TECH CO., LTD. [China (Mainland)]
Business Type:Manufacturer
City: Shenzhen
Province/State: Guangdong
Country/Region: China (Mainland)
